■ 100% Silicone
■ Ideal for applications in the textile industry
■ Great flowability for application to fabrics
■ Good anti-slip properties
■ High elasticity
Monocomponent elastomer with low viscosity and excellent flowability for application in fabrics. It has excellent adhesion to a variety of fabrics. Available in cartridge, drum and bucket (can be pumped directly to the application).
Sliding lining for application in fabrics for use in socks, tops, bras and pants waistband, avoiding the use of suspenders.
Color | Packaging | |
---|---|---|
Colorless | Cartridge 280mL | |
Black RAL 9017 | Cartridge 280mL |
Method | Test | Unity | Result |
---|---|---|---|
ME-001 | Appearance | Colorless Viscous Liquid | |
ME-005 | Dynamic Viscosity (25°) | mPa.s | 45.000 - 85.000 |
Asset Content | % | 100 | |
PROPERTY AFTER HEALING | |||
ASTM D 2240 | Durometer Hardness | Shore A | 15 - 20 |
ASTM D 412 | Tension at break | MPa | >1 |
ASTM D 412 | Elongation at break | % | >250 |
SURFACE PREPARATION
The surface must be dry, clean, free of dust and oils. Remove all wastes from materials, especially those that are not sufficiently adhered to the layers (sanding, if necessary). Clean and degrease the surface with isopropyl alcohol and keep it dry before application. It may be necessary to use primer to improve adhesion. For better finishing it is recommended to use adhesive tape in the lateral areas where the contact of the sealant is not intended. In the case of applications on substrates other than those mentioned in this bulletin, it is recommended to perform a test to evaluate the adhesion and compatibility of the sealant with the material.
HOW TO USE:
For Cartridges:
Cut the applicator nozzle at a 45° angle in the desired size and thickness. Apply the sealant to the area and immediately do the finishing with a spatula. After spatulation, remove the adhesive crepe tape. We recommend cleaning the tools before curing the product, because after curing the sealant is only mechanically removed.
For Buckets and Drums:
It can be pumped directly from the packaging using a transfer pump with drive plate. Care is taken to avoid the presence of water or moisture in the conduits and premature cure. When using a tape coating machine, curing is usually accelerated by increasing the absolute amount of water vapor in the air. This is controlled by temperature in combination with relative humidity.
■ 100% Silicone
■ Ideal for applications in the textile industry
■ Great flowability for application to fabrics
■ Good anti-slip properties
■ High elasticity
■ This product is not tested or represented as suitable for medical or pharmaceutical uses.
The product should be kept in its original packaging and stored in a cool place at a temperature of 5 to 30ºC, away from direct sunlight and away from heat sources. To avoid contamination of the unused product, do not return any leftover material in its original packaging. Keep out of reach of children and pets.
Validity (from the date of manufacture): 13 months.
Except Bucket: 4 months.